Turbo Cut^™

Time Release™ Compound

Part No. 11043, 1 Gal, each or 4/Case.

• Fast cut on dead paint, gelcoat and fiberglass.
• Removes 1200 grit or finer sand scratches.
• High gloss finishing on fresh or aged, single stage paint and clear coat.
• No wax, silicone or crystalline silica.
• Non-greasy, water-based for easy clean up without staining.
• Follow up with Finish Cut^™ #11040, using pad #11204, then protect with Shine Master^™ #11033.
• Marine use: Exterior defect removal on gelcoat or neglected fiberglass.